Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
IPSP Configuration Mode Commands
reserved-free-percentage ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
reserved-free-percentage
This command is used to set the amount of free addresses reserved for use on the primary HA.
Product
PDSN, HA
Privilege
Security Administrator, Administrator
Syntax
Default: 100
specifies the percentage of free addresses reserved for the use on the primary HA for IP pool sharing
during upgrade.
Usage
This command is used with pool-sharing-protocol active mode on primary HA. Before using this command,
pool-sharing-protocol in Ethernet Interface Configuration Mode must be configured.
For more information, refer to the Ethernet Interface Configuration Mode Commands chapter in this guide.
pool-sharing-protocol in Ethernet Interface Configuration Mode must be configured.
For more information, refer to the Ethernet Interface Configuration Mode Commands chapter in this guide.
Example
To reserve 40 percent of free addresses in primary HA for IP pool sharing, enter the following command:
To reserve 40 percent of free addresses in primary HA for IP pool sharing, enter the following command: