Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Loopback Interface Configuration Mode Commands
ip address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip address
Configures the IP options for the current interface.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Deletes the specified IP address from the interface configuration.
Configures the IP address and network mask for the interface.
specifies an IP address and the subnet mask pair which is used to identify the IP
address of the interface.
must be specified using the standard IPv4 dotted decimal notation.
Currently, the only value accepted for ip_mask is 255.255.255.255.
: the IP address and the length in bits of the network mask. This must be an IP
address entered in dotted decimal notation and a mask (192.168.1.0/32). Currently, the only value accepted
for bit_mask is 32.
The
for bit_mask is 32.
The
keyword is used to configure a secondary IP address on the interface. This is referred to as
multi-homing of the interface.
The
The
keyword activates the IP address for Interchassis Session Redundancy.
Usage
Create and manage loopback interfaces for the current context.
Example
The following command configures IP address to associate with the interface:
ip address
The following command configures IP address to associate with the interface:
ip address
The following command removes the associated IP address for the interface:
no ip address
no ip address