Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
MME-HSS Service Configuration Mode Commands
request timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
request timeout
This command configures the application request timeout between MME-HSS service and HSS node. The MME system
will wait for this duration before retransmitting the request to corresponding HSS node.
will wait for this duration before retransmitting the request to corresponding HSS node.
Product
MME
Privilege
Security Administrator, Administrator
Syntax
Disables the configured application request timeout value.
Sets the application request time out duration to default value of 300 seconds.
Default: 300 seconds
Specifies the application request timeout duration in seconds. The MME will wait for this duration before
retrying the request with corresponding HSS.
Specifies the application request timeout duration in seconds. The MME will wait for this duration before
retrying the request with corresponding HSS.
must be an integer from 1 through 300.
Usage
Use this command to set the waiting period for MME-HSS service in seconds after which the request is
deemed to have failed or system will resend the request.
deemed to have failed or system will resend the request.
Example
The following example configures the application request timeout duration to 300 seconds:
The following example configures the application request timeout duration to 300 seconds: