Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
OSPF VRF Configuration Mode Commands
▀ area
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
area
This command configures the various parameters, including authentication, area identification, virtual link id,
delay/interval values for the specified OSPF area using specific VRF instance.
delay/interval values for the specified OSPF area using specific VRF instance.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables/removes configured parameters for the specified OSPF area using specific VRF instance.
Specifies the IP address in IPv4 dotted-decimal notation, of the area where authentication will be enabled.
Specifies the identification number of the area where parameters to be configured. This must be an integer
from 0 through 4294967295.
from 0 through 4294967295.
Sets the OSPF authentication type to use the message digest 5 (MD5) authentication method.
Sets the default cost for an OSPF area.
is the default cost to be configured for the specified area and must be an integer from 0
through 16777215.
Configures and defines an area as an NSSA (Not So Stubby Area) and configures OSPF parameters for it.
: This optional keyword configures the OSPF VRF instances to
originate default information to the NSSA area.
: This optional keyword configures the OSPF VRF instance to not to redistribute
external routes to the NSSA area.