Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ALCAP Configuration Mode Commands
▀ timeout alcap
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
timeout alcap
This command configures the timeout duration for various ALCAP procedure timers in ALCAP service.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Syntax
Sets the timer values to default duration for specific ALCAP procedure in an ALCAP service.
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Path Block procedure. When a request to block a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-BLOCK-REQEST message to AAL2
node/peer ALCAP Manage and starts Timer_BLO timer. The timer waits for specified timeout duration
reporting the failure of AAL2 Path Block procedure. When a request to block a particular AAL2 path is
recieved by ALCAP service, the ALCAP service sends ALCAP-BLOCK-REQEST message to AAL2
node/peer ALCAP Manage and starts Timer_BLO timer. The timer waits for specified timeout duration
for ALCAP-BLOCK-CONFRIM message before reporting error in procedure.
If AAL2 Node responds with ALCAP-BLOCK-CONFRIM message the timer will stop before the expiry of
timeout duration and system reports the successful completion of the procedure.
timeout duration and system reports the successful completion of the procedure.
must be an integer value from 2 through 60.
Default: 5
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Establish Request procedure. When a request to esblish a connection through
ALCAP-ESTABLISH-REQUEST message is sent to AAL2 node the system starts the Timer_ERQ timer.
The timer waits for specified timeout duration
reporting the failure of AAL2 Establish Request procedure. When a request to esblish a connection through
ALCAP-ESTABLISH-REQUEST message is sent to AAL2 node the system starts the Timer_ERQ timer.
The timer waits for specified timeout duration
for ALCAP-ESTABLISH-CONFRIM
message before reporting error in procedure and system requests ALCAP Manager to free the AAL2-channel
used for connection and also indicates to start the RESET procedure for this channel.
If AAL2 Node responds with ALCAP-ESTABLISH-CONFRIM message the timer will stop before the
expiry of timeout duration and system reports the successful completion of the procedure.
used for connection and also indicates to start the RESET procedure for this channel.
If AAL2 Node responds with ALCAP-ESTABLISH-CONFRIM message the timer will stop before the
expiry of timeout duration and system reports the successful completion of the procedure.
must be an integer value from 5 through 30.
Default: 5
Specifies the maximum time, in seconds, the system waits for response from adjacent AAL2 node before
reporting the failure of AAL2 Modify Request procedure. When a request to modify a connection or channel
through ALCAP-MODIFY-REQUEST message is sent to AAL2 node the system starts the Timer_MOD
timer. The timer waits for specified timeout duration
reporting the failure of AAL2 Modify Request procedure. When a request to modify a connection or channel
through ALCAP-MODIFY-REQUEST message is sent to AAL2 node the system starts the Timer_MOD
timer. The timer waits for specified timeout duration
for ALCAP-MODIFY-
CONFRIM message before reporting error in procedure and system requests ALCAP Manager to initiates the