Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDIF Service Configuration Mode Commands
▀ aaa attribute
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
aaa attribute
Sets the system attributes for AAA messages.
Product
PDIF
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured AAA attribute.
Returns the specified aaa attribute to the original default system settings.
Specifies the base-station ID and consists of the SID + NID + CELLID.
must contain 12 hexadecimal upper-case ASCII characters.
Default: 4095
Specifies the radius attribute value when sending authentication and accounting messages.
Specifies the radius attribute value when sending authentication and accounting messages.
can be configured to any value in the range 0 - 32767
Calling station phone number.
can be configured to any value from 1 - 15 numbers.
Use this command to generate attribute values without creating a new ASR 5000 image.
Usage
If the RADIUS protocol is being used, accounting messages can be sent over a AAA interface to the
RADIUS server.
3gpp2-serving-pcf attribute value (if configured) is sent in both RADIUS authentication and accounting
messages. If the attribute value is not configured (or explicitly 'not configured' using no command), radius
RADIUS server.
3gpp2-serving-pcf attribute value (if configured) is sent in both RADIUS authentication and accounting
messages. If the attribute value is not configured (or explicitly 'not configured' using no command), radius