Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDSN Service Configuration Mode Commands
simple-ip allow ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
simple-ip allow
This command is used to disable or re-enable SImple-IP sessions from making a connection before authorization takes
place.
place.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
When a session attempts PPP authentication, it is assumed that it is a Simple-IP session and it is disconnected
before the user is authenticated (RADIUS or local authentication). Also, if
before the user is authenticated (RADIUS or local authentication). Also, if
is enabled and
PPP authentication is not performed, after IPCP the session is disconnected if it is discovered that it is a
Simple-IP session.
Simple-IP session.
Reset this command to allow Simple-IP sessions to connect.
Usage
Use this command to prevent Simple-IP sessions from connecting to a PDSN service.
Example
The following command configures the PDSN service so that it will reject any Simple-IP sessions:
The following command configures the PDSN service so that it will reject any Simple-IP sessions:
The following command configures the PDSN service to allow Simple-IP sessions: