Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
PDSN Service Configuration Mode Commands
threshold all-ppp-send-discard ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
threshold all-ppp-send-discard
Set an alarm or alert for the PDSN service based on the number of packets that the PPP protocol processing layer
internally discarded on transmit for any reason.
internally discarded on transmit for any reason.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the alert or alarm.
Default: 0
The high threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to generate an alert or alarm. It can be configured to any integer value between 0 and 100000.
The high threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to generate an alert or alarm. It can be configured to any integer value between 0 and 100000.
Default:0
The low threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to any integer value between 0 and 100000.
The low threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to any integer value between 0 and 100000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to set an alert or an alarm when the number of discarded PPP send packets is equal to or
greater than a specified number.
Alerts or alarms are triggered for the number of discarded PPP send packets is based on the following rules:
greater than a specified number.
Alerts or alarms are triggered for the number of discarded PPP send packets is based on the following rules:
Enter condition: Actual number of discarded PPP send packets > High Threshold
Clear condition: Actual number of discarded PPP send packets £ Low Threshold
Example
The following command configures a number of discarded PPP send packets threshold of
The following command configures a number of discarded PPP send packets threshold of
and a low threshold of
for a system using the Alarm thresholding model: