Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Policy Control Configuration Mode Commands
custom-reauth-trigger ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
custom-reauth-trigger
This command enables custom reauth event triggers.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting for this command.
Disables all custom event triggers.
This is the default setting.
This is the default setting.
Enables preservation-changed event trigger.
Important:
This keyword is for use with a customer-specific implementation, and will be available only if a valid
license is installed.
Enables reactivation-changed event trigger.
Important:
This keyword is for use with a customer-specific implementation, and will be available only if a valid
license is installed.
Usage
Use this command to enable/disable custom reauth event triggers.
It is recommended that the preservation-changed and reactivation-changed triggers both be enabled. As, when
the bearer goes into preservation mode with the preservation-changed trigger, the reactivation-changed
trigger must also be enabled for the bearer to get reactivated subsequently.
If only the preservation-changed trigger is enabled, and the bearer goes into preservation mode, the bearer
will never get reactivated. The reactivation triggers will be ignored. If only the reactivation-changed trigger is
enabled, reactivation of the already active bearer does not take place, and the reactivation triggers are
ignored.
It is recommended that the preservation-changed and reactivation-changed triggers both be enabled. As, when
the bearer goes into preservation mode with the preservation-changed trigger, the reactivation-changed
trigger must also be enabled for the bearer to get reactivated subsequently.
If only the preservation-changed trigger is enabled, and the bearer goes into preservation mode, the bearer
will never get reactivated. The reactivation triggers will be ignored. If only the reactivation-changed trigger is
enabled, reactivation of the already active bearer does not take place, and the reactivation triggers are
ignored.