Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
RoHC Profile Compression Configuration Mode Commands
▀ total-jitter-ipv4
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
total-jitter-ipv4
The total jitter experienced after compression for IPV4.
Product
HSGW, PDSN
Privilege
Administrator
Syntax
Returns the command to its default value.
Default: 270
Specifies the time interval to use in milliseconds.
Specifies the time interval to use in milliseconds.
must be an integer from 0 through 999999999.
Usage
Use this command to set the jitter limit after compression.
Example
The following command sets the jitter after compression limit to 900ms:
The following command sets the jitter after compression limit to 900ms: