Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Rulebase Configuration Mode Commands
▀ extract-host-from-uri
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
extract-host-from-uri
If the host field is not present in HTTP/WSP header, this command will extract host from URI, and store it in the host
field.
field.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Removes the previous extract-host-from-uri configuration for all protocols.
Specifies protocol(s) for extract-host-from-uri configuration.
Indicates that more than one of the previous keywords can be entered within a single command.
Usage
If the host field is not present in HTTP/WSP header, this command will extract host from URI, and store it in
the host field to enable ―http host‖ and ―wsp host‖ rule matches using the stored value.
the host field to enable ―http host‖ and ―wsp host‖ rule matches using the stored value.
Important:
Applying the
command a second time will overwrite the previous
configuration. For example, if you apply the command
, and then
apply the command
, extraction of host from URI will happen only for
WSP analyzer.
Example
The following command configures extraction of host from URI for both HTTP and WSP protocols:
The following command configures extraction of host from URI for both HTTP and WSP protocols: