Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Rulebase Configuration Mode Commands
▀ fw-and-nat default-policy
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
fw-and-nat default-policy
This command configures the default Firewall-and-NAT policy for an ACS Rulebase.
Important:
This command is only available in StarOS 8.1 and StarOS 9.0 and later. This command must be used
to configure the Policy-based Firewall-and-NAT feature.
Product
FW, NAT
Privilege
Security Administrator, Administrator
Syntax
Removes the previously configured Firewall-and-NAT policy configured for the current rulebase.
Specifies the Firewall-and-NAT policy name.
must be an alpha and/or numeric string of 1 through 63 characters in length.
Usage
Use this command to configure the default Firewall-and-NAT policy for an ACS rulebase.
This policy is used for a subscriber only if:
This policy is used for a subscriber only if:
In the APN/subscriber configuration modes, the
command is
configured.
Or, a policy to use is not received from the AAA/OCS.
For more information, see the Personal Stateful Firewall Administration Guide.
Example
The following command configures a Firewall-and-NAT policy named
The following command configures a Firewall-and-NAT policy named
to the rulebase: