Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Rulebase Configuration Mode Commands
nat policy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
nat policy
This command enables/disables Network Address Translation (NAT) processing for all subscribers using this rulebase.
Important:
In StarOS 8.1 and StarOS 9.0 and later, for Policy-based Firewall-and-NAT, this command is
available in the Firewall-and-NAT Policy Configuration Mode.
Important:
Before enabling NAT processing for a subscriber, Firewall must be enabled for the subscriber. See
the
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Sets the default NAT processing setting for all subscribers using this rulebase.
Default: Disabled
Default: Disabled
Disables NAT processing for all subscribers using this rulebase.
Enables NAT processing for all subscribers using this rulebase.
Important:
This keyword is only available in StarOS 8.3 and later.
Specifies the default NAT realm to be used if one is not already configured.
must be an alpha and/or numeric string of 1 through 31 characters in length.
Important:
Including the default NAT realm, a maximum of three NAT realms are supported.
Usage
Use this command to enable/disable NAT processing for all subscribers using this rulebase.