Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Rulebase Configuration Mode Commands
▀ wtp packets-out-of-order
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
wtp packets-out-of-order
This command configures how to process WTP packets that are out of order, while waiting for the earlier packet(s) to
arrive.
arrive.
Product
ECS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Specifies the maximum duration for which WTP out-of-order packets are retained, in milliseconds, before
reassembly is needed.
reassembly is needed.
is the timeout duration in milliseconds, and must be an integer from 100 through 30000.
Default: 5000 milliseconds
Specifies the WTP out-of-order segment behavior after buffering a copy:
: Send WTP out-of-order segment after it becomes ordered
: Send WTP out-of-order segment immediately after buffering a copy
Default:
Usage
Use this command to configure TCP out-of-order segment options.
If out-of-order-timeout is specified, out-of-order packets are retained, until either all packets have been
received or the configured timeout has expired for the oldest packet. If all packets have been received, a
temporary complete packet is reconstructed for analysis. Then all packets are forwarded in order from first to
last. If all packets are not received, the packets will be forwarded without being passed through the protocol
analyzers, except for the IP analyzer.
If
If out-of-order-timeout is specified, out-of-order packets are retained, until either all packets have been
received or the configured timeout has expired for the oldest packet. If all packets have been received, a
temporary complete packet is reconstructed for analysis. Then all packets are forwarded in order from first to
last. If all packets are not received, the packets will be forwarded without being passed through the protocol
analyzers, except for the IP analyzer.
If
transmitting is specified, the packets are held onto and reordered. After
successfully reordering the packets, they are processed in the proper order. If reordering is not successful due
to timeout (wtp out-of-order-timeout), the received packets are forwarded without being passed through the
protocol analyzers.
If
to timeout (wtp out-of-order-timeout), the received packets are forwarded without being passed through the
protocol analyzers.
If
is specified, the packets are transmitted as they are received without any in-line services or
Charging Action processing, however a copy of each packet is retained. When the missing packet is received,
complete deep packet inspection of all the packets and all relevant in-line services is undertaken, and then the
last packet is forward (unless otherwise configured by the in-line services or Charging Action).
complete deep packet inspection of all the packets and all relevant in-line services is undertaken, and then the
last packet is forward (unless otherwise configured by the in-line services or Charging Action).