Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Ruledef Configuration Mode Commands
▀ p2p traffic-type
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
p2p traffic-type
This command defines a rule definition to analyze and charge user traffic based on the type of traffic, such as voice or
non-voice.
non-voice.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the specified rule definition.
Specifies how to logically match the information in the analyzed field.
must be one of the following:
: does not equal
: equals
Specifies the condition for this rule definition.
must be one of the following:
Usage
Use this command to configure the system to detect voice or non-voice P2P traffic. When the detection of a
protocol is enabled then the detection of sub-type is enabled by default.
protocol is enabled then the detection of sub-type is enabled by default.
Example
The following command configures the system to detect voice traffic:
The following command configures the system to detect voice traffic: