Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
APN Configuration Mode Commands
mediation-device ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
mediation-device
Enables the use of a mediation device and specifies the system context to use for communicating with the device.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Indicates that more than one of the options can be specified with a single execution of the command.
Deletes the mediation-device configuration.
Changes the mediation device to no context-name configured and restores the mediation device‘s default
properties.
properties.
Default: The subscribers destination context.
Configures the mediation VPN context for this APN.
Configures the mediation VPN context for this APN.
can be from 1 to 79 alpha and/or numeric characters and is case sensitive.
If not specified, the mediation context is same as the destination context of the subscriber.
Default: Disabled
When enabled, delays the CPC response until an Accounting Start response is received from the mediation
device.
When enabled, delays the CPC response until an Accounting Start response is received from the mediation
device.
Default: Disabled
Specifies that the system delays PDUs from the MS until a response to the GGSN‘s accounting start request
is received from the mediation device. The PDUs are queued if possible, or discarded
If "no-early-PDUs" is enabled, the chassis shall not send uplink/downlink data from/to a MS till it receives
the Acct-Rsp Start for the same--from the mediation device. On receiving the Acct-Rsp, pending PDUs are
sent out. The chassis shall buffer up to 4 PDUs per call, before it flushes all the PDUs for that call. It is
disabled by default.
Specifies that the system delays PDUs from the MS until a response to the GGSN‘s accounting start request
is received from the mediation device. The PDUs are queued if possible, or discarded
If "no-early-PDUs" is enabled, the chassis shall not send uplink/downlink data from/to a MS till it receives
the Acct-Rsp Start for the same--from the mediation device. On receiving the Acct-Rsp, pending PDUs are
sent out. The chassis shall buffer up to 4 PDUs per call, before it flushes all the PDUs for that call. It is
disabled by default.