Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
SGSN Operator Policy Configuration Mode Commands
apn ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
apn
This command creates and associates an SGSN access point name (APN) configuration instance with the SGSN
operator policy.
operator policy.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the specified APN policy.
Creates a default SGSN APN policy with default values for all parameters.
: Enter a string of 1 to 62 alphanumeric characters, including dots (.) and dashes (-), to define
the GT-address network identifier. For releases 8.0 the maximum number of characters is 63; for releases 8.1
and higher, the maximum number of characters is 62.
and higher, the maximum number of characters is 62.
Enter a string of 1 to 18 alphanumeric characters including dots (.). The entry must be in the
following format, where # represents a digit: : MNC###.MCC###.GPRS.
Usage
Use this command, to create an SGSN APN policy configuration or to access the SGSN APN configuration
mode to update/modify the policy. Either of the two keywords can be used to identify the specific APN
policy configuration.
mode to update/modify the policy. Either of the two keywords can be used to identify the specific APN
policy configuration.
Example
For this SGSN operator policy, create an APN configuration for network
For this SGSN operator policy, create an APN configuration for network
: