Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
SGSN Operator Policy Configuration Mode Commands
▀ authenticate
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
authenticate
Product
This command enables/disables authentication for procedures like attach and service request.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables and removes the defined authentication configuration for this SGSN operator policy.
Resets all parameters to default values for the authentication process configured for this SGSN operator
policy.
policy.
This keyword enables/disables authentication for activate requests and allows one or more of the following
options to the configuration:
options to the configuration:
: Select one of the two options:
Enables/disables authentication for first activate .
Defines 1-in-N selective authentication of subscriber events - where an
event is an Attach Request, RAU, Service Request, Activate-Primary-PDP-Context Request, or
Detach Request. If the frequency is set for 12, then the SGSN skips authentication for the first 11
events and authenticates on the 12th event.
Detach Request. If the frequency is set for 12, then the SGSN skips authentication for the first 11
events and authenticates on the 12th event.
must be an integer from 1 to 16.
Enables/disables authentication for every primary activate request.
Specifies that procedures - attaches, service requests, RAUs, detaches, and activations - will be authenticated.
This can be fine-tuned by adding either or both of the following parameters:
This can be fine-tuned by adding either or both of the following parameters:
must be one of the two: