Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
S-GW Service Configuration Mode Commands
egtp-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
egtp-service
Configures an eGTP service to use as either an ingress (S1-U) or egress (S5/S8) service for the S-GW.
Product
S-GW
Privilege
Administrator
Syntax
Removes the selected EGTP service from this service.
Specifies the egtp-service to be used as the egress eGTP service on a GTP based S5/S8 interface.
: Specifies the name of the context where the eGTP service resides.
must be from 1
to 63 alpha and/or numeric characters and be an existing context name where an eGTP service resides.
Caution:
is not supported in this release.
: Specifies the name of the egress eGTP service.
must be from 1 to 63 alpha and/or
numeric characters and be an existing eGTP service name.
Specifies the egtp-service to be used as the ingress eGTP service on the S11 interface.
must be from 1
to 63 alpha and/or numeric characters and be an existing eGTP service name.
Usage
Use this command to configure the eGTP service to use with this S-GW service. The eGTP service must be
existing and be configured with the appropriate parameters supporting the intended service type.
existing and be configured with the appropriate parameters supporting the intended service type.
Example
The following command configures the S-GW service to use an eGTP service named
The following command configures the S-GW service to use an eGTP service named
as it‘s ingress service: