Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Subscriber Configuration Mode Commands
▀ ip route
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
ip route
Configures the static route to use to reach the subscriber‘s network.
Product
All
Privilege
Security Administrator, Administrator
Syntax
[
]
Removes the configured route information from the subscriber data.
Specifies the target IP address for which the route information applies.
Specifies the networking mask for the route.
1 bits in the
1 bits in the
indicate that bit position in the
must also have a value of 1.
0 bits in the
indicate that bit position in the
does not need to match, i.e., the bit can
be either a 0 or a 1.
For example, if the IP address and mask were specified as 172.168.10.0 and 255.255.255.224, respectively,
the network mask will be 172.168.0.0 (obtained by logically ANDing the IP address with the IP mask).
For example, if the IP address and mask were specified as 172.168.10.0 and 255.255.255.224, respectively,
the network mask will be 172.168.0.0 (obtained by logically ANDing the IP address with the IP mask).
Default: assigned remote IP address will be used as the gateway address.
Specifies the IP address of the next hop gateway for the route.
Specifies the IP address of the next hop gateway for the route.
Usage
The static routes are also known as framed IP routes for subscribers. Static routes are typically applicable for
subscribers connecting via other networks or when the mobile device acts as a gateway to a network on the
far side of the device.
For example, if the mobile device is assigned IP address 1.2.3.4 and it acts as a gateway for the network
10.2.3.0 (with a network mask of 255.255.255.0) a static route would be configured with the
subscribers connecting via other networks or when the mobile device acts as a gateway to a network on the
far side of the device.
For example, if the mobile device is assigned IP address 1.2.3.4 and it acts as a gateway for the network
10.2.3.0 (with a network mask of 255.255.255.0) a static route would be configured with the
being 10.2.3.0,
being 255.255.255.0, and
being 1.2.3.4.
Example