Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Subscriber Configuration Mode Commands
mobile-ip ha ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
mobile-ip ha
Accommodates two MIP HA options in subscriber mode.
Product
PDSN, HA, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Disables the mobile IP HA option specified.
The name of an existing MIP HA Assignment table.
must be a string of alphanumeric characters from 1 through 63 characters in length.
Default is disabled.
Enables or disables the HA to accept or reject the RRQ from a particular subscriber.
Enables or disables the HA to accept or reject the RRQ from a particular subscriber.
Usage
Use this command to assign a MIP HA Assignment table to the current subscriber.
Use this command to disable or enable the HA to accept or reject the RRQ from a particular subscriber when
the HA address in the incoming MIP RRQ is not the same as the HA service address. The feature is off by
default which causes the RRQ to be rejected with the error code UNKNOWN_HOME_AGENT.
Use this command to disable or enable the HA to accept or reject the RRQ from a particular subscriber when
the HA address in the incoming MIP RRQ is not the same as the HA service address. The feature is off by
default which causes the RRQ to be rejected with the error code UNKNOWN_HOME_AGENT.
Example
The following command assigns the MIP HA Assignment table named
The following command assigns the MIP HA Assignment table named
to the current subscriber:
The following command sets ignore-unknown-ha-addr-error to its default disabled state:
.