Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
ASN Gateway Service Configuration Mode Commands
▀ idle-mode
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
idle-mode
Configures the timeout duration in seconds an ASN GW service waits to send a session to the idle mode if no activity
occurs for specified duration of entry timeout or reactivate an idle session after the specified duration of exit timeout.
occurs for specified duration of entry timeout or reactivate an idle session after the specified duration of exit timeout.
Product
ASN GW
Privilege
Administrator
Syntax
Resets the idle mode durations to their respective default values.
Disables/removes the configured idle mode entry and/or exit timeout duration for a session.
Default: 60
Specifies the maximum duration in seconds allowed for idle mode entry for a session.
Specifies the maximum duration in seconds allowed for idle mode entry for a session.
is measured in seconds and can be configured to any integer value from 1 through 100000.
Default: 60
Specifies the maximum duration in seconds allowed for session to reenter in to active mode after idle mode
exit.
Specifies the maximum duration in seconds allowed for session to reenter in to active mode after idle mode
exit.
is measured in seconds and can be configured to any integer value from 1 through 100000.
Default: 4069
Specifies the maximum time (in seconds) allowed for a session to remain in idle mode.
Specifies the maximum time (in seconds) allowed for a session to remain in idle mode.
must be
an integer from 128 to 65535.
Usage
Use this command to configure the ASN GW service to send a session for idle mode or active mode after
specified duration of time.
specified duration of time.
Example
The following command configures the idle mode entry timeout value to
The following command configures the idle mode entry timeout value to
seconds: