Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
ASN Service Profile Configuration Mode Commands
uplink-qos-id ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
uplink-qos-id
Use this command to specify the QoS table identifier to the traffic flow in the uplink direction for subscribers in this
service.
service.
Product
ASN GW
Privilege
Administrator
Syntax
Deletes the configured class map for this traffic flow in the ASN GW service.
Specifies the configured ASN QoS Descriptor Identifier to this traffic flow.
is the identifier of an existing ASN QoS Descriptor Table configured in the source context.
Refer to the ASN QoS Descriptor Configuration Mode chapter of this reference for additional information on
configuring the QoS descriptor table identifier.
configuring the QoS descriptor table identifier.
Usage
Use this command to apply a QoS identifier for uplink traffic with a configured ASN QoS Descriptor Table
Identifier for the ASN GW service subscribers.
Configure only one QoS identifier per ASN GW service profile.
Access ASN QoS Descriptor Configuration Mode through Context Configuration Mode.
Identifier for the ASN GW service subscribers.
Configure only one QoS identifier per ASN GW service profile.
Access ASN QoS Descriptor Configuration Mode through Context Configuration Mode.
Example
The following command applies the QoS table identifier
The following command applies the QoS table identifier
to this traffic: