Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Crypto Map IKEv2-IPv6 Configuration Mode Commands
▀ ikev2-ikesa
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ikev2-ikesa
Configures parameters for the IKEv2 IKE Security Associations within this crypto template.
Product
P-GW
Privilege
Administrator
Syntax
Restores the selected keyword to its default value.
Disables a previously enabled parameter.
Default: 5
Specifies the maximum number of retransmissions of an IKEv2 IKE exchange request if a response has not
been received.
Specifies the maximum number of retransmissions of an IKEv2 IKE exchange request if a response has not
been received.
must be an integer from 1 to 8.
Specifies if IKESA rekeying should occur before the configured lifetime expires (at approximately 90% of
the lifetime interval). Default is not to re-key.
the lifetime interval). Default is not to re-key.
Default: 60
Specifies the number of seconds before a IKEv2 IKE Security Association, that is not fully established, is
terminated.
Specifies the number of seconds before a IKEv2 IKE Security Association, that is not fully established, is
terminated.
must be an integer from 1 to 3600.
Usage
Use this command to configure parameters for the IKEv2 IKE Security Associations within this crypto
template.
template.
Example
The following command configures the maximum number of IKEv2 IKESA request retransmissions to :
The following command configures the maximum number of IKEv2 IKESA request retransmissions to :