Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Gs Service Configuration Mode Commands
bssap+ ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
bssap+
This command defines the Base Station System Application Part Plus configuration parameters for the Gs service to
enable the SGSN to access a Visitor Location Register(s) (VLRs).
enable the SGSN to access a Visitor Location Register(s) (VLRs).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured BSSAP+ subsystem number from this Gs service.
Specifies the subsystem number to configure in this Gs interface to use BSSAP+.
must be an integer from 1 through 255.
Usage
Use this command to configure the BSSAP+ subsystem with Gs interface in this service to communicate with
VLR(s).
VLR(s).
Important:
A single SCCP network configuration instance can not be shared with multiple Gs services.
Important:
To start a Gs service, the user needs to configure the command parameter.
Example
Following command configures subsystem 101 with BSSAP+ in this Gs service.
Following command configures subsystem 101 with BSSAP+ in this Gs service.