Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Gs Service Configuration Mode Commands
▀ non-pool-area
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
non-pool-area
This command creates a non-pool area for a set of subscriber location area code (LAC) values that can be used with a
specific VLR for the Gs service.
specific VLR for the Gs service.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the configured non-pool area from this Gs service.
Specifies the name of the non-pool area to configure with this command.
must be an alpha and/or numeric string of 1 to 63 characters.
Specifies the name of the VLR to be associated with this non-pool area.
is the name of VLR and must be an alpha and/or numeric string of 1 to 63 characters.
Specifies the subscribers‘ location area code to be attached with this non-pool area and specific VLR. This
LAC of subscriber is obtained from the radio area indicator (RAI).
LAC of subscriber is obtained from the radio area indicator (RAI).
is the LAC value and must be an integer value from 1 through 65535.
More than one of the above keywords can be entered within a single command.
Usage
Use this command to specify the non-pool area containing VLR name to use for a set of LAC.
This command can be used multiple times, subject to a limit of 32 LAC values (the total for
This command can be used multiple times, subject to a limit of 32 LAC values (the total for
and
configurations) per Gs service.
Example
Following command configure a non-pool area
Following command configure a non-pool area
to use VLR named
for LAC
in a Gs
service.