Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
HSGW Service Configuration Mode Commands
▀ retransmission-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
retransmission-timeout
Configures the maximum allowable time for the HSGW service to wait for a response from the eAN/PCF before it
attempts to communicate with the eAN/PCF again (if the system is configured to retry the PCF) or marks the eAN/PCF
as unreachable.
attempts to communicate with the eAN/PCF again (if the system is configured to retry the PCF) or marks the eAN/PCF
as unreachable.
Product
HSGW
Privilege
Administrator
Syntax
Resets the timeout setting to the default value of 3.
Deletes a previously configured timeout value.
Default: 3
Specifies the maximum allowable time, in seconds, for the HSGW service to wait for a response from the
eAN/PCF before it: a) attempts to communicate with the eAN/PCF again (if the system is configured to retry
the PCF) or b) marks the eAN/PCF as unreachable.
Specifies the maximum allowable time, in seconds, for the HSGW service to wait for a response from the
eAN/PCF before it: a) attempts to communicate with the eAN/PCF again (if the system is configured to retry
the PCF) or b) marks the eAN/PCF as unreachable.
must be an integer value between 1 and 1000000.
Usage
Use the retransmission timeout command in conjunction with the
command in
order to configure the HSGW services behavior when it does not receive a response from a particular PCF.
Example
The following command configures a retransmission timeout value of 5 seconds:
The following command configures a retransmission timeout value of 5 seconds: