Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
IMS Authorization Service Configuration Mode Commands
▀ signaling-flow permit
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
signaling-flow permit
This command specifies the packet filters and policy servers for bandwidth control and singling context enforcement
that define the traffic that is allowed through the dedicated signaling context.
that define the traffic that is allowed through the dedicated signaling context.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the signaling flow option configured with this command.
The server address
refers to the destination IP address in uplink packets, and the source IP
address in downlink packets.
is IPv4/IPv6 address in standard notation and can be used with sub-net mask.
A maximum of 16 signaling server address can be configured per IMS Authorization service.
Specifies the TCP/UDP port number(s) of the server and to be used for communication.
must be an integer from 1 through 65535.
provides the option to configure the range of ports on server for
communication.
must be an integer from 1 through 65535 but lesser than
, and
must be
an integer from 1 through 65535 but greater than
.
Specifies the customized description for configured signaling server.
must be an alpha and/or numeric string with maximum of 64 characters.
Usage
Traffic that matches any instance of the signaling-flow command will be forwarded via the signaling PDP
context. In addition, the policy server gives policy gates to use for the signaling PDP context.
context. In addition, the policy server gives policy gates to use for the signaling PDP context.
Example
The following command sets the packet filter server address to
The following command sets the packet filter server address to
with port number
for packet filtering.