Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
LNS Service Configuration Mode Commands
▀ tunnel-authentication
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
tunnel-authentication
Enables/disables L2TP tunnel authentication for the LNS service.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables tunnel authentication
Tunnel authentication is enabled by default.
Tunnel authentication is enabled by default.
Usage
When tunnel authentication is enabled, a configured shared secret is used to ensure that the LNS service is
communicating with an authorized peer LAC. The shared secret is configured by the
communicating with an authorized peer LAC. The shared secret is configured by the
command,
the
command in the Subscriber Configuration mode, or the Tunnel-Password attribute in
the subscribers RADIUS profile.
Example
To disable tunnel authentication, use the following command:
To disable tunnel authentication, use the following command:
To re-enable tunnel authentication, use the following command: