Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
PVC Interface Configuration Mode Commands
ip ospf dead-interval ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ip ospf dead-interval
This command configures the dead-interval and the delay time in seconds, for OSPF communications.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the value set and returns the value to its default.
The interval, in seconds, that the router should wait. During this interval, if no packets are received then the
system considers the neighboring router to be off-line. This interval is typically 4 times the duration of the
hello-interval.
system considers the neighboring router to be off-line. This interval is typically 4 times the duration of the
hello-interval.
must be an integer from 1 through 65535. Default: 40
Usage
Use this command to set the dead-intervals or delays for OSPF communications.
Example
To set the dead-interval to 100, use the following command;
To set the dead-interval to 100, use the following command;
To delete the setting for the dead-interval and reset the dead-interval value to its default of 40, use the following
command‘
command‘