Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
ACS Ruledef Configuration Mode Commands
▀ ip src-address
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip src-address
This command defines a rule definition to analyze and charge user traffic based on IP source address.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the specified rule definition.
: Specifies how to logically match the IP source address.
must be one of the following:
must be one of the following:
: Does not equal
: Lesser than or equals
: Equals
: Greater than or equals
: Specifies IP address of the source node for incoming traffic in IPv4 or IPv6 standard
notation.
must be an IPv4 address in dotted decimal notation, or an IPv6 address in colon
notation.
: Specifies IP address of the source node for incoming traffic in IPv4 or IPv6 standard
notation with subnet mask bit.
must be an IPv4 address in dotted decimal notation, or
an IPv6 address in colon notation with subnet mask bit. The mask bit is a numeric value which is the number
of bits in the subnet mask.
of bits in the subnet mask.
: Specifies the range criteria:
: Not in the range of
: In the range of
: Specifies the host pool name.
must be a string of 1 through 63
characters in length.
Usage
Use this command to specify a rule definition to analyze user traffic based on IP source address.
Example
The following command creates an IP rule definition for analyzing user traffic using an IP source address of
The following command creates an IP rule definition for analyzing user traffic using an IP source address of
: