Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
APN Configuration Mode Commands
cc-roaming ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
cc-roaming
Configures the roaming subscriber charging characteristics (CC) used by the GGSN when those from the SGSN will not
be accepted.
be accepted.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Specifies the behavior bit for the roaming subscriber charging characteristic.
can be configured to any unique bit from 001H to FFFH (0001 to 1111 1111 1111 bin) where the least-
significant bit corresponds to B1 and the most-significant bit corresponds to B12.
Default: 8
Specifies the profile index for the roaming subscriber charging characteristic.
Specifies the profile index for the roaming subscriber charging characteristic.
can be configured to any integer value between 0 and 15.
Important:
3GPP standards suggest that profile index values of 1, 2, 4, and 8 be used for hot billing, flat rate
billing, prepaid billing and normal billing, respectively. A single charging characteristics profile can contain multiple
behavior settings.
behavior settings.
Usage
When the GGSN is configured to reject the charging characteristics sent by the SGSN for ―roaming‖
subscribers, it uses the profile index specified by this command to determine the appropriate CCs to use.
Multiple behavior bits can be configured for a single profile index by ―Or‖ing the bit strings together and
convert the result to hexadecimal.
The properties of the actual CC profile index are configured as part of the GGSN service using the cc profile
command. Refer to the GGSN Service Configuration Mode chapter of this reference for additional
information on this command.
subscribers, it uses the profile index specified by this command to determine the appropriate CCs to use.
Multiple behavior bits can be configured for a single profile index by ―Or‖ing the bit strings together and
convert the result to hexadecimal.
The properties of the actual CC profile index are configured as part of the GGSN service using the cc profile
command. Refer to the GGSN Service Configuration Mode chapter of this reference for additional
information on this command.
Example
The following command configures a behavior bit 10 (0010 0000 0000) and a profile index of 10 for roaming subscriber
charging characteristics:
The following command configures a behavior bit 10 (0010 0000 0000) and a profile index of 10 for roaming subscriber
charging characteristics:
The following command configures the behavior bits 9 (0001 0000 0000) and 6 (0000 0010 0000) and a profile index of
14 for roaming subscriber charging characteristics:
14 for roaming subscriber charging characteristics: