Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
APN Configuration Mode Commands
▀ radius returned-username
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
radius returned-username
Product
This command configures the username that is returned in accounting messages. If the username is not available in the
Protocol Configuration Options (PCO), then the radius returned username is preferred to the constructed username
(imsi@apn, msisdn@apn, or outbound username).
Protocol Configuration Options (PCO), then the radius returned username is preferred to the constructed username
(imsi@apn, msisdn@apn, or outbound username).
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
If Radius Server returns a username in the Access-Accept message and username is not available in the
Protocol Configuration Options (PCO) and then the new username from the radius server will be used.
Protocol Configuration Options (PCO) and then the new username from the radius server will be used.
If the username is not available in the PCO, constructed username (imsi@apn, msisdn@apn) will be used
irrespective of the username for the Radius Server. This is the default.
irrespective of the username for the Radius Server. This is the default.
The default value for the radius returned-username is prefer-constructed-username i.e. constructed username
(imsi@apn, msisdn@apn) will be used.
(imsi@apn, msisdn@apn) will be used.
Important:
If the username is available in the PCO, then that username will be used irrespective of this CLI
(radius returned-username).
Usage
Use this command to configure the username that is returned in accounting messages
Example
Following command sets the default value for the radius returned-username is prefer-constructed-username; i.e.
constructed username (imsi@apn, msisdn@apn):
Following command sets the default value for the radius returned-username is prefer-constructed-username; i.e.
constructed username (imsi@apn, msisdn@apn):