Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Border Gateway Protocol Configuration Mode Commands
▀ neighbor
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
neighbor
This command configures BGP routers that interconnect to non-broadcast networks. Note that a remote AS number
must be specified for a neighbor before other parameters can be configured.
must be specified for a neighbor before other parameters can be configured.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
Delete the specified parameter from the router configuration.
Enable the exchange of routes with this neighbor.
The minimum interval, in seconds, between sending BGP routing updates.
Default: 30
Default: 30
must be an integer from 0 through 600.
Originate default routes to this neighbor
: Specifies the route-map that contains the criteria to originate default routes.
must be the name of an existing route-map in the current context.
Filter updates to and from this neighbor based on a route access list.
Default: No filtering is performed.
Default: No filtering is performed.
: The name or number of an existing route-access-list.
: Indicates that incoming advertised routes should be filtered.
: Indicates that outgoing advertised routes should be filtered.
Allow EBGP neighbors not on directly connected networks.
Default hop count: 255
Default hop count: 255
: The maximum number of hops allowed to reach a neighbor.
must be an integer
from 1 through 255.