Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Card Configuration Mode Commands
redundancy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
redundancy
Configures the type of redundancy for a line card or SPIO.
Product
PDSN, FA, HA, GGSN, SSGN
Privilege
Security Administrator, Administrator
Syntax
Restores redundancy to
type redundancy.
Specifies no port redundancy is used. This is used mostly for legacy products.
Sets the OLC line card so that ATM cross-connects are not redundant and they are independent.
Important:
This keyword is specific to OLC-type (ATM) line cards installed in an ST16 platform. If you attempt
to use this keyword on line cards other than the OLC-type in an ST16, it could result in the line card being switched into
an offline state.
an offline state.
Enables port redundancy on line cards or on SPIO cards.
This is the default setting used by the system.
This is the default setting used by the system.
Important:
Port-type redundancy does not affect line card failover/redundancy operations.
Important:
This feature is not yet fully supported.
With release 8.1 and higher, this keyword enables pseudo-APS type port redundancy on OLC2/CLC2 line
cards.
cards.
Instructs the system to execute the command without additional prompting for command confirmation.