Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Channelized Port Configuration Mode Commands
path ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
path
This command configures the parameters that define the routing path for a DLCI. It must match with the DLCI
configuration parameters. The values entered with these commands should be noted as they will be needed to configure
the
configuration parameters. The values entered with these commands should be noted as they will be needed to configure
the
and
commands also in this configuration mode.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the routing path entry from the configuration.
Identifies a specific path configuration that will be associated with a DLCI. The
must be an integer
from 1 to 3.
Selects the channelization for the connection.
DS1: (AKA: T1) Is associated with North American networks and would be the best choice to work with the
SONET (can also work with SDH) framing selected with the
DS1: (AKA: T1) Is associated with North American networks and would be the best choice to work with the
SONET (can also work with SDH) framing selected with the
configuration command. DS1 splits the
path into 28 logical connections.
: Defines the number of logical connections supported via the DS1. The selection must be an
integer from 1 to 28.
E1: is associated with European networks and would be associated with the SDH (can also work with
SONET) framing selected with the
E1: is associated with European networks and would be associated with the SDH (can also work with
SONET) framing selected with the
configuration command. E1 splits the path into 21 logical
connections.
: Defines the number of logical connections supported via the E1. The selection must be an
integer from 1 to 21.
Frame mapping sets the channelization according to the national standards that correlate with the
framing/speed standards. This option selects the mapping of containers (C), virtual containers (VC), tributary
units (TU), and tributary unit groups (TUG), that is appropriate for the channel characteristics:
framing/speed standards. This option selects the mapping of containers (C), virtual containers (VC), tributary
units (TU), and tributary unit groups (TUG), that is appropriate for the channel characteristics:
: Appropriate for DS1 in SDH. Maps as follows AU-3—VC-3— m# —TUG-2— m# —
TU-12—VC-12—C-12
: Appropriate for DS1 in SDH. Maps as follows AU-4—VC-4—TUG-3— m# —TUG-2—
m# —TU-11—VC-11—C-11