Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
AAA Server Group Configuration Mode Commands
▀ radius attribute
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
radius attribute
Configures the system‘s RADIUS identification parameters.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes configuration for the specified keyword.
Configures the default setting.
Specifies the attribute name by which the system will be identified in Access-Request messages.
must be
a case-sensitive alpha and/or numeric string of 1 through 32 characters in length.
Specifies the AAA interface IP address(es) used to identify the system. Up to two addresses can be
configured.
configured.
: The IP address of the primary interface to use in the current context. This must be
specified using the standard IPv4 dotted decimal notation.
: The IP address of the secondary interface to use in the current context. This must be specified using
the standard IPv4 dotted decimal notation.
Configures next hop IP address for this NAS IP address. It optionally sets the RADIUS client to provide
VLAN ID and nexthop forwarding address to system when running in single nexthop gateway mode.
VLAN ID and nexthop forwarding address to system when running in single nexthop gateway mode.
must be specified using the standard IPv4 dotted decimal notation.