Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
▀ crypto group
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
crypto group
Creates a crypto group and enters the Crypto Configuration Mode allowing the configuration of crypto group
parameters.
parameters.
Product
PDSN, PDIF, HA, GGSN, SCM
Privilege
Administrator, Config-Administrator
Syntax
Deletes a previously configured crypto group.
The name of the crypto group and can consist of from 1 to 127 alpha and/or numeric characters in length and
is case sensitive.
is case sensitive.
Important:
A maximum of 32 crypto groups per context can be configured.
Usage
Use this command to enter the configuration mode allowing the configuration of crypto group parameters.
Crypto (tunnel) groups are used to support the Redundant IPSec Tunnel Fail-over feature and consist of two
configured ISAKMP crypto maps. Each crypto map defines the IPSec policy for a tunnel. In the crypto group,
one tunnel serves as the primary, the other as the secondary (redundant).
Crypto (tunnel) groups are used to support the Redundant IPSec Tunnel Fail-over feature and consist of two
configured ISAKMP crypto maps. Each crypto map defines the IPSec policy for a tunnel. In the crypto group,
one tunnel serves as the primary, the other as the secondary (redundant).
Example
The following command configures a crypto group called
The following command configures a crypto group called
: