Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
ikev1 policy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
ikev1 policy
This command configures/creates an ISAKMP policy with the specified priority and enters ISAKMP Configuration
Mode for IKE v1 protocol.
Mode for IKE v1 protocol.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured ISAKMP policy for IKE v1 protocol.
Default: 0
This must be an integer from 0 through 100. ISAKMP policies for IKE v1 protocol with lower priority
numbers take precedence over policies with higher priorities. ―0‖ is the highest priority.
This must be an integer from 0 through 100. ISAKMP policies for IKE v1 protocol with lower priority
numbers take precedence over policies with higher priorities. ―0‖ is the highest priority.
Usage
Use this command to create ISAKMP policies to regulate how IPSec key negotiation is performed for IKE v1
protocol.
Internet Security Association Key Management Protocol (ISAKMP) policies are used to define Internet Key
Exchange (IKE) SAs. The IKE SAs dictate the shared security parameters (i.e. which encryption parameters
to use, how to authenticate the remote peer, etc.) between the system and a peer security gateway.
During Phase 1 of IPSec establishment, the system and a peer security gateway negotiate IKE SAs. These
SAs are used to protect subsequent communications between the peers including the IPSec SA negotiation
process.
Multiple ISAKMP policies can be configured in the same context and are used in an order determined by
their priority number.
protocol.
Internet Security Association Key Management Protocol (ISAKMP) policies are used to define Internet Key
Exchange (IKE) SAs. The IKE SAs dictate the shared security parameters (i.e. which encryption parameters
to use, how to authenticate the remote peer, etc.) between the system and a peer security gateway.
During Phase 1 of IPSec establishment, the system and a peer security gateway negotiate IKE SAs. These
SAs are used to protect subsequent communications between the peers including the IPSec SA negotiation
process.
Multiple ISAKMP policies can be configured in the same context and are used in an order determined by
their priority number.
Example
Use the following command to create an ISAKMP policy with the priority 1 and enter the ISAKMP Configuration
Mode:
Use the following command to create an ISAKMP policy with the priority 1 and enter the ISAKMP Configuration
Mode: