Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Context Configuration Mode Commands
map-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
map-service
This command creates a Mobile Application Part (MAP) Service instance and enters the MAP Service Configuration
Mode to define or edit the MAP service parameters.
Mode to define or edit the MAP service parameters.
MAP is the SS7 protocol that provides the application layer required by some of the nodes in GPRS/UMTS networks to
communicate with each other in order to provide services to mobile phone users. MAP is used by the serving GPRS
support node (SGSN) to access SS7 network nodes such as a home location register (HLR) or a radio access network
(RAN).
communicate with each other in order to provide services to mobile phone users. MAP is used by the serving GPRS
support node (SGSN) to access SS7 network nodes such as a home location register (HLR) or a radio access network
(RAN).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Remove the specified MAP service from the configuration for the current context.
A unique string of 1 to 63 alphanumeric characters that identify the specific MAP service.
Usage
Use this command to create, edit, or remove a MAP service configuration.
Important:
For details about the commands and parameters, check the MAP Service Configuration Mode
chapter.
Example
The following command creates a MAP service named
The following command creates a MAP service named
:
The following command removes the configuration for a MAP service named
from the configuration for the
current context: