Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Credit Control Configuration Mode Commands
▀ diameter result-code
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
diameter result-code
This command enables sending GTP Create-PDP-Context-Rsp message with cause code based on the DCCA result
code.
code.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Result code received as DIAMETER_AUTHORIZATION_REJECTED(5003).
Result code received as DIAMETER_USER_UNKNOWN(5030).
Cause code to be sent in GTP response.
To send GTP cause code GTP_USER_AUTHENTICATION_FAILED in GTP response.
To send GTP cause code GTP_NO_RESOURCES_AVAILABLE in GTP response (default cause code).
Usage
On receiving result-code as AUTHORIZATION-REJECTED or DIAMETER_USER_UNKNOWN from
DCCA server, the cause code can either be sent as GTP_NO_RESOURCE_AVAILABLE or
GTP_AUTHENTICATION_FAILED in GTP create-PDP-Context response message, based on this CLI
configuration. By default, GTP_NO_RESOURCE_AVAILABLE is sent.
DCCA server, the cause code can either be sent as GTP_NO_RESOURCE_AVAILABLE or
GTP_AUTHENTICATION_FAILED in GTP create-PDP-Context response message, based on this CLI
configuration. By default, GTP_NO_RESOURCE_AVAILABLE is sent.
Example
The following command sets the deny cause as user authentication failure when the CCA-Initial has the result code
DIAMETER_AUTHORIZATION_REJECTED(5003):
The following command sets the deny cause as user authentication failure when the CCA-Initial has the result code
DIAMETER_AUTHORIZATION_REJECTED(5003):