Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Crypto Template Configuration Mode Commands
▀ ikev2-ikesa
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ikev2-ikesa
Configures parameters for the IKEv2 IKE Security Associations within this crypto template.
Product
PDIF
PDG/TTG
Privilege
Security Administrator, Administrator
Syntax
Disables a previously enabled parameter.
Default is no keepalive-user-activity. Activate to reset the user inactivity timer when keepalive messages are
received from peer.
received from peer.
Default: 5
Specifies the maximum number of retransmissions of an IKEv2 IKE exchange request if a response has not
been received.
Specifies the maximum number of retransmissions of an IKEv2 IKE exchange request if a response has not
been received.
must be an integer from 1 to 8.
Default is to enable. Default policy is to generate an IKEv2 Invalid Message ID error when PDIF receives an
out-of-sequence packet.
out-of-sequence packet.
Default: 500
Specifies the timeout period in milliseconds before a retransmission of an IKEv2 IKE exchange request is
sent (if the corresponding response has not been received).
Specifies the timeout period in milliseconds before a retransmission of an IKEv2 IKE exchange request is
sent (if the corresponding response has not been received).
must be and integer from 300 to 15000.
Specifies if IKESA rekeying should occur before the configured lifetime expires (at approximately 90% of
the lifetime interval). Default is not to re-key.
the lifetime interval). Default is not to re-key.