Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
CSCF Access Profile Configuration Mode Commands
timeout ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
timeout
Sets timeout values for CSCF and SIP transactions for subscribers using this Access Profile.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Syntax
Sets transaction and expiry timers for SIP.
: This time is used to control the retransmission of 200OK messages to INVITEs after an ACK
is sent. The ACK transaction is cleared after this period. This timer is applicable only for unreliable transport.
must be an integer from 0 to 2147483646.
Default: 64*T1 (128 seconds, recommended minimum)
: This timer is used to control the time interval between each retransmission. The interval
doubles after each retransmission. This is used by P-CSCF/A-BG only when it sending message toward the
UE. Example: T1, 2T1, 4T2, etc. This timer is applicable only for unreliable transport.
UE. Example: T1, 2T1, 4T2, etc. This timer is applicable only for unreliable transport.
must be an integer from 0 to 2147483646.
Default: 2000 ms (2 secs, recommended minimum).
: This timer is used to control the period for which the request continues to get retransmitted.
This is used by P-CSCF/A-BG only when it sending message toward the UE. This timer is applicable both for
reliable and unreliable transport.
reliable and unreliable transport.
must be an integer from 0 to 2147483646.
Default: 16 seconds (recommended minimum).
: This timer is used to control the period for which the final response to non-invite
transaction should be buffered. The buffered response for the retransmitted non-invite request should be sent
within that interval. This timer is applicable only for unreliable transport.
within that interval. This timer is applicable only for unreliable transport.
must be an integer from 0 to 2147483646.
Default: 17 seconds (recommended minimum).
: This time is used to control the retransmission of 200OK to INVITE after ACK is sent. The ACK
transaction will be cleared after this interval. This timer is applicable only for unreliable transport.
must be an integer from 0 to 2147483646.
Default: 64*T1 (32 seconds, recommended minimum)
: This timer is used by SIP while acting as UA Role and no final response is received
for the INVITE request sent. This timer is applicable for both reliable and unreliable transport.
must be an integer from 0 to 2147483646.
Default: 100 seconds (recommended minimum).
: Specifies the time interval (in milliseconds) between each retransmission. The interval doubles
after each retransmission, for example: T1, 2T1, 4T2, etc. This timer is applicable only for unreliable
transport.
transport.