Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
DHCP Service Configuration Mode Commands
▀ retransmission-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
retransmission-timeout
Configures the amount of time that must pass with no response before the system re-attempts to communicate with the
DHCP server.
DHCP server.
Product
GGSN, ASN-GW
Privilege
Security Administrator, Administrator
Syntax
Default: 10000
Specifies the time that the system waits before retrying to communicate with the DHCP server.
Specifies the time that the system waits before retrying to communicate with the DHCP server.
is measured in milliseconds and can be configured to any integer value from 100 to 20000.
Usage
This command works in conjunction with the
command to establish a limit on
the number of times that communication with a DHCP server is attempted before a failure is logged.
This parameter specifies the time between retries.
This parameter specifies the time between retries.
Example
The following command configures a retry timeout of 1000 milliseconds:
The following command configures a retry timeout of 1000 milliseconds: