Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
EAP Configuration Mode Commands
mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
mode
Configures the system as one of three types of EAP devices: authenticator pass-through, authenticator server, or peer.
Product
PDIF, ASN GW
Privilege
Security Administrator, Administrator
Syntax
Configures the default mode of Authenticator-pass-through.
Configures the system as an authenticator pass-through allowing EAP authentication to be performed by
another server.
This is the default setting for this command.
another server.
This is the default setting for this command.
Configures the system as an authenticator server. This allows the system to respond to EAP requests.
Configures the system as a peer device requiring it to make EAP requests of another server or pass-through
device.
device.
Usage
Use this command to configure the system to perform as one of three types of EAP devices and configure
settings in an EAP mode.
EAP Mode Configuration Mode commands are defined in the EAP Mode Configuration Mode Commands
chapter.
settings in an EAP mode.
EAP Mode Configuration Mode commands are defined in the EAP Mode Configuration Mode Commands
chapter.
Example
The following command configures the system to perform as an authenticator pass-through:
The following command configures the system to perform as an authenticator pass-through: