Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Commands (A-C)
▀ card reboot
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
card reboot
This performs a reset of the target card. Rebooting a packet processing or line card will result in the card downloading
the image from the system management card.
the image from the system management card.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Indicates the slot number of the card which is the target of the reboot.
Indicates the reboot is to take place ignoring any state or usage warnings that might be generated.
Indicates that the command is to execute without any additional prompt and confirmation from the user.
Usage
A reboot is used to reset the card and receive a new download. This may be useful when a card is not
responding or when it is necessary to cause the card to reload its image and restart.
responding or when it is necessary to cause the card to reload its image and restart.
Important:
Caution should be taken in using this command as rebooting a card which has no redundancy card
available may cause a service interruption and loss of active sessions.
Caution:
The
and
options should only be used concurrently by experienced users as
this will cause an immediate reboot regardless of warnings and no confirmation from the user.
Important:
This command is not supported on all platforms.
Example
The following will cause the card in slot to reboot without any confirmation from the user. The card will not reboot if
there are any warnings generated.
The following will cause the card in slot to reboot without any confirmation from the user. The card will not reboot if
there are any warnings generated.
The following command will cause the card in slot to reboot regardless of any warnings. The user must provide
confirmation prior to this command executing.
confirmation prior to this command executing.