Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Commands (D-S)
▀ debug ip ospf lsa
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
debug ip ospf lsa
This command enables troubleshooting on OSPF Link State Advertisements (LSAs), based on the specific LSA option.
If no keywords are specified, all options are enabled. If logging is enabled, results are sent to the logging system.
If no keywords are specified, all options are enabled. If logging is enabled, results are sent to the logging system.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator, Operator
Syntax
Disables the specified LSA debug information. If no keyword is specified, all LSA debug information is
disabled.
disabled.
Enable LSA flooding information.
Enable LSA generation information.
Enable LSA install information.
Enable LSA maxage information in seconds. The maxage is equal to 3600 seconds.
Enable LSA refresh information.
Usage
Use this command to output debug information for LSAs.
Example
To enable all LSA debug information, enter the following command;
To enable all LSA debug information, enter the following command;
To disable all LSA debug information, enter the following command;