Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Modes Commands (D-S)
session trace subscriber ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
session trace subscriber
This command enable disables the subscriber session trace functionality based on a specified subscriber device or ID on
one or all instance of session on a specified EPS network elements.
one or all instance of session on a specified EPS network elements.
Product
MME, P-GW, S-GW
Privilege
Operator
Syntax
Disables the entire session trace or for a specific network element and/or trace reference.
Identifies the network element that, in turn, identifies the interfaces where the session trace is to occur.
Specific interfaces can be specified using the interface keyword described below.
Specific interfaces can be specified using the interface keyword described below.
: Specifies that the session trace is to occur on one or all interfaces on the MME.
: Specifies that the session trace is to occur on one or all interfaces on the P-GW.
: Specifies that the session trace is to occur on one or all interfaces on the S-GW.
: Specifies that the session trace is to occur on one or all interfaces on the P-GW.
: Specifies that the session trace is to occur on one or all interfaces on the S-GW.
Specifies the International Mobile Equipment Identification number of the subscribers UE.
must be the 8
digit TAC (Type Allocation Code) and 6 digit serial number. Only the first 14 digits of the IMEI/IMEISV are
used to find the equipment ID.
used to find the equipment ID.
Specifies the International Mobile Subscriber Identification (IMSI).
must be the 3 digit MCC (Mobile
Country Code), 2 or 3 digit MNC (Mobile Network Code), and the MSIN (Mobile Subscriber Identification
Number). The total should not exceed 15 digits.
Number). The total should not exceed 15 digits.
Specifies the interfaces where the session trace application will collect data.
: Specifies that all interfaces associated with the selected network element
: Specifies the interface type where the session trace application will collect trace data. The
following interfaces are applicable for the network element type:
MME:
: Specifies that the interface where the trace will be performed is the S1-MME interface
between the MME and the eNodeB.