Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (A-C)
▀ show boot
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show boot
Displays information on the current boot image in use.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Identifies the OS image, configuration file, and boot priority used during the initial start up of the system.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Show the boot information in preparing for maintenance activities by verifying current boot data. The boot
image in use may not be the same as the boot image stored on the SPC/SMC due to upgrades and pending
reboots.
image in use may not be the same as the boot image stored on the SPC/SMC due to upgrades and pending
reboots.
displays the actual boot image and configuration file loaded
during boot. This may or may not be the highest priority image and makes this command useful when
comparing the loaded image to the priority list.
comparing the loaded image to the priority list.
Important:
This command is not supported on all platforms.
Example
The following command displays the boot system configuration priority list:
The following command displays the boot system configuration priority list:
The following command displays the initial configuration after a system boot: