Cisco Cisco Packet Data Interworking Function (PDIF) Guía Para Resolver Problemas
Exec Mode Show Commands (A-C)
show card ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show card
Displays card information based upon the filtering options specified.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Specifies what card information is to be displayed.
: indicates diagnostic information is to be displayed for all cards or the card
specified by
.
must be a value in the range 1 through 48.
: indicates information on the installed hardware is to be displayed for all
cards or the card specified by
.
must be a value in the range 1 through 48.
: indicates detailed information is to be displayed for all cards or the card specified
by
.
must be a value in the range 1 to 48.
: indicates the front installed to rear installed card mapping is to be displayed.
: indicates information for each card in front and RCC slots is to be displayed. The
keyword indicates all 48 slots are to be displayed.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
View the card information to verify card installations for front and rear as well as for checking basic or
detailed card information.
detailed card information.
Example
The following command displays the diagnostic information for a card in slot :
The following command displays the diagnostic information for a card in slot :
The following command displays the detailed information for a card in slot :
The following command displays the card mappings for the chassis: